Make Komatsu  Model D41P-6  Details New ROPS frame to fit over cab.

Model General Purpose Bucket  Details General purpose bucket to fit JCB Q hitch, cutting edge drilled to take teeth or bolt on edge. Buckets as new.

Make Omal  Model HB1700  Year 2001  Serial No 151  Details Hydraulic breaker to fit a 20 ton excavator, comes with 1 new pin, one owner from new.

Make Tilt head  Model 5-7 tonne  Details Hydraulic tilting head to fit 5-7 ton excavator, on 45mm pins.

Make CAT  Model 3306DI  Details Good second hand Cat 3306DI Engine. Block Number 13Z

Make Timber Arch  Details Tyres 80% good, (18 ply), painted in Cat yellow.

Model JCB Teleporter  Details 4 in 1 bucket to fit JCB telporter quick fit. Re-sprayed black.

Make 4 in 1 Bucket  Year 2005  Details 0.56 cubic metre, 4 in 1 bucket with teeth, un used

Details Lifting hook for a 13tonne excavator, ex water board, had little or no use.

Make Tow tip  Details Tow tip bucket, un used,

Make Hitachi  Model 135  Details un used blade for hitachi 135 excavator

Make Kinshofer  Model 10F180  Year 2002  Details Hydraulic rotating grab to fit 13 tonne excavator

Make Bakker bv  Model HB 80  Year 2002  Serial No 200087  Details Hydraulic grab to fit 13tonne excavator

Make Extension  Model 2500  Year 2018  Details New un used, 2.5metre extension arm to fit 13 tonne excavator, on 65mm pins

Make BEILITE Machinery  Year un used  Details New/un used hydraulic breaker to fit 18-25 tonne excavator

Make Strimech  Model Log grab  Year 2009  Details Weighs 450kgs, Log grab with sliding forks to fit JCB Quick hitch.

Make Meccanica Breganzese  Model MB - S14 S3  Year 2014  Serial No S10473  Details Hydraulic screening bucket to fit a 13 tonne excavator, on 65mm pin.

Make Ulrich/Case  Model CX130  Year 2006  Serial No 58631  Details Ex water board, dipper extension to fit Case CX130

Model PC200-6-7-8  Hours Un used  Details 15 metre long reach arm to Fit Komatsu 20 tonne excavator with bucket. Also have 15 metre arms to fit Hitachi ZX210 and CAT 320

Make Lemac  Model Grab  Details Hydraulic grab to fit JCB Teleporter quick fit.

Make Log grab  Details Hydraulic Log grab on quick hitch fittings

Make CAT  Model 428F/432F  Year 2018  Details 4 in 1 bucket to fit 428F or 432F, done very little work.

Make CAT  Model 953  Details New/ unused, 4 in 1 clamshell to fit Cat 953C/D tracked loader

Make Hitachi  Model ZX210  Details 15 metre arm to fit Hitachi ZX210

Make Meccanica Breganzese  Model BF60  Year 2020  Serial No 20994  Details Stone crusher bucket to fit 13 tonne excavator.

Make Grab  Model 4-5 tonne  Details Grab to fit 4-5 tonne excavator

Make V Bucket  Model 20 Tonne  Details V bucket on 80mm pin to fit a 20 tonne excavator

Make Meccanica Breganzese  Model BF70.2  Year 2009  Serial No 5407  Details Jaw crusher bucket to fit 20tonne excavator

Make V Bucket  Model 13 tonne  Details V bucket on 65mm pin to fit 13 tonne excavator